

0%
CAN42 G2
- Where to use
- Features
- Download
The CAN42 G2 Module provides interfaces to 2 independent Controller Area Networks or CAN. Messages received from CAN are time-stamped to synchronize their reception with analog and digital measurements from other Modules in the system. Fully implemented features include Listen-Only mode, Self-Reception of CAN messages and transmission of Remote Frames. The CAN42 G2 Module provides independent channel filtering.
- When monitoring CAN based messages
- When controlling CAN based devices
- 2 independent CAN channels each at 10 kbit/s to 1 Mbit/s data rate
- Compatible with ISO 11898-2 (High Speed) physical layer standard and with CAN 2.0B protocol (supports both 11-bit and 29-bit identifiers)
- 3 modes of operation:
- Operational – transmit and receive CAN messages (active)
- Listen only mode – only receive CAN messages (passive)
- CAN bus simulator mode – simulates receiving CAN messages from CAN (no physical connection needed)
- CAN messages are time stamped with a resolution of 62.5 ns
- Individually configurable identifier list per channel provides acceptance filtering
- Data and remote frames are supported
- Software selectable 120 Ω termination per channel
- Lemo 7-way EHG.0B connectors
- 9-way D-sub connectors are provided with FLXB20 SubModules
- Broschüre: PAK MKII Hardware
- Film: The PAK MKII Frontend